Create this project yourself with sheet material cut to size by TOSIZE.se!

Jet

Easy

1 minute

Description

A playhouse with a desk, shelf to display toys and light with pull switch. The house is made with 18 mm primed MDF.

Playhouse for the little ones!

The custom panels are easy to put together. We started with the roof panels. Because one panel is longer than the other, you can screw them together at a 90 degree angle. The ends are mitered so that they can be screwed onto the side panels (there is a small corner sticking out). We then placed the desk at a height of 45 cm in between. We screwed the back panels together with sufficient screws around and into the desk.
NOTE: we made a mistake in the dimensions. We had ordered the outside size for the desk (100cm), but we still had to remove 2x18mm (3.6cm). We also thought we needed a double plank for strength, but a single one is sturdy enough. We removed 10 cm from the extra plank we had, from which we attached an extra plank.
All screw holes were closed and then the whole thing was painted.