Create this project yourself with sheet material cut to size by TOSIZE.se!

Nicky

Easy

2 minutes

Description

In this project, two cabinets have been installed that will stand in front of the boiler. Kitchen utensils and other items can be stored in these cabinets. A place has also been created between the two cupboards where the ironing board can be stored. These cabinets also cover most of the pipes.

Clear MDF storage cabinets

First I varnished all the MDF panels. I used a pore filler for the end edges so that they do not absorb the paint too hard. When the panels were all dry, I first nailed the cabinets to make it easier to work. Then I pre-drilled and screwed them in place. By nailing them they stay in place better and the work is easy to do alone.

Before the side walls were attached, I first made the holes for the shelf supports, because this is easier to do. when the panel is in place. Then I came out of the 'closet' for the ironing board, cutouts for the pipes. This way I could easily slide it over this.

Finally, I drilled the hinge holes and attached the mounting plates. Afterwards, simple handles were placed on the doors and it was done!